1. 首页
  2. 产品
  3. 英文



GS Series

New Generation All-Electric injection molding machine

50-250 Tons Third Generation injection molding machine



  Download


Features Product Specifications  


Features

Clamping Unit
  • Integrated guide armrest design
    Integrated and synchronized processing, improve assembly accuracy, reduces guide bar warp and improves mold adjustment.
  • Precision and Clean design
     Large linear distance configuration linear slide, higher accuracy and longer slider life.
    Moving platen non-contact with Tie-bar. Prevent
    products contaminated by lubrications oil.
  • Platen structure optimization
    Square structure with concentrated crank force design, reduce platen distortion.
Injection Unit
  • Pivoting injection unit
    130-250 Tons provide manual rotation of the injection unit. Easier for repair or replacement without remove the mold.
  • High rigidity injection structure
    Injection casting Integrated design and all processed synchronized, high strength and precision.
Energy saving, Environmental

Save more than 60% of energy consumption
The  All electric power system is completely driven by  servo motor, at the same time, only water for feeding pipe inlet and mold cooling is required, save more than 60% of energy compared with the traditional hydraulic, at the same time, only water for feeding pipe inlet and mold cooling is required, cooling water usage saving to 1/5 or less of the hydraulic machine.

Controller

New generation ME300 electronic control system

  • The swivel mounted 15" LCD high resolution touch screen, graphicaluser interface.
  • Adopt dual CPU architecture (separation of man-machine and control) to improve system reliability.
  • Connected with EtherCAT, it has high-speed, real-time and stable communication.
  • The OS adopts Linux instant multiplex system, which is stable and efficient.
  • Internal molding parameters can be stored in 1000 groups, and USB can be used as external, this unit expands the storage space.
Open
Close


Product Specifications  

GS-50

Injection Unit
 Unit
  • GS-50 (C)
  • GS-50 (D)
Screw diameter
 mm
  • 22 - 26
  • 28 - 32
Calculated injection capacity cm3
  • 34 - 48
  • 62 - 80
Actual shot weight-PS
 g (oz)
  • 32 (1.1) - 45 (1.6)
  • 58 (2.0) - 76 (2.7)
Plastizing capacity kg/hr
  • 19 - 29
  • 35 - 51
Screw L/D ratio
 m/m
  • 23.6 - 20.0
  • 22.9 - 20.0
Screw stroke
 mm
  • 90
  • 100
Clamping Unit
Clamping force
 ton 50
Clamp stroke
 mm 270
Mold thickness (Min-Max.) mm 150 - 350
Open daylight-Max.
 mm 620
Tie-bar distance
 mm 360 x 310
Platen dimension
 mm 505 x 502
Ejector stroke
 mm 70
General
Machine weight
 ton 2.9
Machine dimensions
 mm 2672 x 1275 x 1990

GS-80

Injection Unit
 Unit
  • GS-80 (D)
  • GS-80 (F)
Screw diameter
 mm
  • 28 - 32
  • 32 - 36
Calculated injection capacity cm3
  • 62 - 80
  • 117 - 148
Actual shot weight-PS
 g (oz)
  • 58(2.0) - 76(2.7)
  • 110(3.9) - 139(4.9)
Plastizing capacity kg/hr
  • 35 - 51
  • 50 - 68
Screw L/D ratio
 m/m
  • 22.9 - 20.0
  • 22.5 - 20.0
Screw stroke
 mm
  • 100
  • 145
Clamping Unit
Clamping force
 ton 80
Clamp stroke
 mm 320
Mold thickness (Min-Max.) mm 150 - 380
Open daylight-Max.
 mm 700
Tie-bar distance
 mm 410 X 360
Platen dimension
 mm 585 x 530
Ejector stroke
 mm 80
General
Machine weight
 ton 4.1
Machine dimensions
 mm 4350 X 1329 X 2018

GS-100

Injection Unit
 Unit
  • GS-100 (D)
  • GS-100 (F)
Screw diameter
 mm
  • 28 - 32
  • 32 - 36
Calculated injection capacity cm3
  • 62 - 80
  • 117 - 148
Actual shot weight-PS
 g (oz)
  • 58(2.0) - 76(2.7)
  • 110(3.9) - 139(4.9)
Plastizing capacity kg/hr
  • 35 - 51
  • 50 - 68
Screw L/D ratio
 m/m
  • 22.9 - 20.0
  • 22.5 - 20.0
Screw stroke
 mm
  • 100
  • 145
Clamping Unit
Clamping force
 ton 100
Clamp stroke
 mm 360
Mold thickness (Min-Max.) mm 150 - 450
Open daylight-Max.
 mm 810
Tie-bar distance
 mm 460 X 410
Platen dimension
 mm 640 X 595
Ejector stroke
 mm 100
General
Machine weight
 ton 4.7
Machine dimensions
 mm 4520 X 1376 X 2083

GS-130

Injection Unit
 Unit
  • GS-130 (F)
  • GS-130 (G)
Screw diameter
 mm
  • 32 - 36
  • 38 - 40 - 46
Calculated injection capacity cm3
  • 117 - 148
  • 163 - 201 - 266
Actual shot weight-PS
 g (oz)
  • 110(3.9) - 139(4.9)
  • 153(5.4) - 189(6.7) - 250(8.8)
Plastizing capacity kg/hr
  • 50 - 68
  • 54 - 70 - 102
Screw L/D ratio m/m
  • 22.5 - 20.0
  • 22.2 - 22.2 - 19.3
Screw stroke
 mm
  • 145
  • 160
Clamping Unit
Clamping force
 ton 130
Clamp stroke
 mm 400
Mold thickness (Min-Max.) mm 180 - 450
Open daylight-Max.
 mm 850
Tie-bar distance
 mm 510 X 460
Platen dimension
 mm 720 X 685
Ejector stroke
 mm 110
General
Machine weight
 ton 6.5
Machine dimensions
 mm 5282 X 1441 X 2185

GS-180

Injection Unit
 Unit
  • GS-180 (G)
  • GS-180 (H)
Screw diameter
 mm
  • 36 - 40 - 46
  • 46 - 50 - 55
Calculated injection capacity cm3
  • 163 - 201 - 266
  • 332 - 393 - 475
Actual shot weight-PS
 g (oz)
  • 153(5.4) - 189(6.7) - 250(8.8)
  • 312(11.0) - 369(13.0) - 447(15.7)
Plastizing capacity kg/hr
  • 54 - 70 - 102
  • 102 - 127 - 158
Screw L/D ratio
 m/m
  • 22.2 - 22.2 - 19.3
  • 21.7 - 22.0 - 20.0
Screw stroke
 mm
  • 160
  • 200
Clamping Unit
Clamping force
 ton 180
Clamp stroke
 mm 470
Mold thickness (Min-Max.) mm 200 - 480
Open daylight-Max.
 mm 950
Tie-bar distance
 mm 560 X 510
Platen dimension
 mm 785 X 745
Ejector stroke
 mm 120
General
Machine weight
 ton 8.9
Machine dimensions
 mm 5940 X 1580 X 2250

GS-250

Injection Unit
 Unit
  • GS-250 (H)
  • GS-250 (J)
Screw diameter
 mm
  • 46 - 50 - 55
  • 50 - 55 - 63
Calculated injection capacity cm3
  • 332 - 393 - 475
  • 471 - 570 - 748
Actual shot weight-PS
 g (oz)
  • 312(11.0) - 369(13.0) - 447(15.7)
  • 443(15.6) - 536(18.9) - 703(24.8)
Plastizing capacity kg/hr
  • 102 - 00a0;127 - 158
  • 118 - 147 - 199
Screw L/D ratio
 m/m
  • 21.7 - 22.0 - 20.0
  • 22.4 - 20.3 - 17.7
Screw stroke
 mm
  • 200
  • 240
Clamping Unit
Clamping force
 ton 250
Clamp stroke
 mm 520
Mold thickness (Min-Max.) mm 250 - 600
Open daylight-Max.
 mm 1120
Tie-bar distance
 mm 610 X 560
Platen dimension
 mm 885 X 830
Ejector stroke
 mm 150
General
Machine weight
 ton 11.5
Machine dimensions
 mm 6450 X 1655 X 2360
GS-50 GS-80 GS-100 GS-130 GS-180 GS-250


VFⅢ Series

Hybrid High-Performance Injection Moulding Machine

60-580 Tones VFⅢ Series Simple, Productive, Economical

With a powerful AX8 controller and a high efficacy gear pump driven by P.M. Synchronous servomotor to satisfy your energy saving requirement and achieves the outstanding process consistency and repeatability.

VFIII Series injection moulding machine has been developed by fusing of merits of hydraulic injection machines (low maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, high­velocity injection, quick response, high repeatability, and low operation noise)

The innovative new ser vo motor with high efficacy gear pump system, achieves energy-saving operation and quick response equivalent to those of all electric injection molding machines.



  Download


Features Product Specifications  


Features

  • Energy saving-almost equivalent to all- electric model machine.
  • Quick response-Injection response time (Standard mode).
  • Stability in low-velocity/low-pressure & wide range-Injection velocity: From ultra-low to high velocity range.
  • Linearity-Excellent linearity in both injection velocity and injection pressure.
  • Excellent injection holding pressure performance-Capability in sustaining high injection holding pressure longer (as compared with full-electric machine).
  • Reduction in the amount of hydraulic oil and cooling water volume.
  • Silent! (Low noise gear pump operation) Almost equivalent to all electric injection molding machine.
High Precision Injection Unit

The VFIII Series optimum screw geometry plus the perfected drive and injection concepts provides excellent plasticising and injection capacity. Newly developed high wear and corrosion resistance ion-nitrided screw and barrel gives the customer a wide choice of materials for numerous applications.The gently prepared and properly homogenised melt is metered accurately,shot after shot,and is injected into the mould with high power and high speed.

The screw and barrel used on the machines has the following properties.
  • Injection screw ACM2 German material
  • urface hardness: 900~1100 HV
  • Processed by Nitride(500~520 °C for 72hrs)
  • Nitrided thickness: 0.4~0.5 mm

Bi-metallic coating screw and barrel (Option) - SKD 61 base material. Excellent wear-resistant, corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials. Victor general purpose screw and barrels can process any kind of material like PE, PP, PA, ABS,AS. We also supply an optional screw & barrel for engineering materials like PC, PBT, PET, with an L/D ratio from 18, 20, 22.

The multi-notch locking style screw tip. the locking style tip is useful for stabilizing part weight and increasing product precision comparing the convectional screw tip. the gap between the screw and check ring is reduced to the least, thereby the back flow resin can be reduced to minimum.

Heavy Duty,Rigid,Clamping Unit

Every component in the clamping unit that is subjected to a mechanical stress was designed and checked using the F.E.M (Finite element method) method of structure analysis. All VFIII Series machines feature a unique, ultra­reliable, five-point toggle clamping mechanism, which is characterised, by an almost ideal kinematic velocity feature.This system has fast speed, high force ratio, sensitive mould protection and good energy saving capabilities. The large square cast iron platens are extremely robust and the widely spaced tie bars allow for even the most complex of moulds.

The large, square cast iron platens virtually eliminate deflection. The bushings are manufactured from graphite impregnated phosphor bronze. Designed to run totally oil-free, there's no chance of contaminating molds, and maintenance is limited to long periodic greasing. 

Mould height adjustment, which is the bull gear system, is operated by an electrical brake motor and when co-ordinated with a precision circuit breaker pro ceeds to prevent the possibility of overloading by force and cause machine damage.

New Generation AX8 Control

Intuitive 15 inch touch screen framed with keyboard

The swivel mounted 15" LCD high resolution touch screen, graphical user interface, can be optimally positioned for each operator, allowing an easy setting position and easy access to the mould area. 
Lighted on/off manual movement buttons for each axis.

Simple Friendly Operation Interface

a. Convenient access to USB data, mold parameters and display screens.
b. Control supports OPC UA communication protocol for Industrial Interoperability towards Industry 4.0 and Industrial Internet of Things (lloT).
c. Barrel heat zones are accurate to 0.1 ·c to ensure stable material plasticizing.
d. Screw position is controlled with in 0.1 mm to precisely control shot size and cushion position. 
e. Control reaction time in 0.5ms.

Overall Setting Screen


Pop-up Keyboards for Data and Text Entry 


SPC/SQC Production Management - Quality Control



Product Specifications

VFⅡ-60

Injection Unit
 Unit
  • VFⅡ-60 (Z)
  • VFⅡ-60 (S)
  • VFⅢ-60 (T)
Calculated injection capacity cm3
  • 14.1 - 19.8
  • 38.0 - 49.1
  • 61.6 - 80.4 - 101.8
Actual shot weight (PS) g
  • 13.2 - 18.6
  • 35.6 - 46.0
  • 57.7 - 75.4 - 95.4
Actual shot weight (PS) (oz)
  • 0.46 - 0.66
  • 1.25 - 1.62
  • 2.03 - 2.65 - 3.36
Calculated Plasticizing capaclty (PS) kg/hr
  • 8.0 - 13.3
  • 20.1 - 28.8
  • 28.5 - 41.6 - 57.2
Screw diameter mm
  • 16 - 19
  • 22 - 25
  • 28 - 32 - 36
Screw L/D ratio
  • 22.0 - 22.0
  • 22.7 - 20.0
  • 22.9 - 20.0 - 17.8
Screw stroke mm
  • 70
  • 100
  • 100
Clamping unit

Clamping force ton 60
Clamp stroke-max. mm 270
Open daylight-max. mm 590
Mold thickness (min . - max.) mm 150 - 320
Platen dimension ( H x V ) mm 490 x 460
Tie-bar distance (H x V ) mm 310 x 310
Ejector stroke mm 80
General
Machine weight
 ton
  • 2.4
  • 2.5
  • 2.5
Machine size (L x W x H) mm 3706 x 1093 x1612


VFⅡ-90

Injection Unit
 Unit
  • VFⅢ-90 (S)
  • VFⅡ-90 (T)
  • VFⅡ-90 (U)
Calculated injection capacity cm3
  • 38.0 - 49.1
  • 61.6 - 80.4 - 101.8
  • 104.6 - 132.3 - 163.4
Actual shot weight (PS) g
  • 35.6 - 46.0
  • 57.7 - 75.4 - 95.4
  • 98.0 - 124.0 - 153.1
Actual shot weight (PS) (oz)
  • 1.25 - 1.62
  • 2.03 - 2.65 - 3.36
  • 3.45 - 4.37 - 5.39
Calculated Plasticizing capaclty (PS) kg/hr
  • 20.1 - 28.8
  • 28.5 - 41.6 - 57.2
  • 39.6 - 54.4 - 2.4
Screw diameter mm
  • 22 - 25
  • 28 - 32 - 36
  • 32 - 36 - 40
Screw L/D ratio
  • 22.7 - 20.0
  • 22.9 - 20.0 - 17.8
  • 22.5 - 20.0 - 18.0
Screw stroke mm
  • 100
  • 100
  • 130
Clamping unit

Clamping force ton 90
Clamp stroke-max. mm 320
Open daylight-max. mm 670
Mold thickness (min . - max.) mm 150 - 350
Platen dimension ( H x V ) mm 560 x 540
Tie-bar distance (H x V ) mm 360 x 360
Ejector stroke mm 100
General
Machine weight
 ton
  • 3.3
  • 3.3
  • 3.4
Machine size (L x W x H) mm 4234 x 1165 x 1593


VFⅡ-120

Injection Unit
 Unit
  • VFⅡ-120 (T)
  • VFⅡ-120 (V)
Calculated injection capacity cm3
  • 61.6 - 80.4 - 101.8
  • 116.6 - 147.6 - 182.2
Actual shot weight (PS) g
  • 57.7 - 75.4 - 95.4
  • 109.3 - 138.3 - 170.8
Actual shot weight (PS) (oz)
  • 2.03 - 2.65 - 3.36
  • 3.85 - 4.87 - 6.01
计算塑化能力 (PS) kg/hr
  • 28.5 - 41.6 - 57.2
  • 39.6 - 54.4 - 72.4
Screw diameter mm
  • 28 - 32 - 36
  • 32 - 36 - 40
Screw L/D ratio
  • 22.9 - 20.0 - 17.8
  • 22.5 - 20.0 - 18.0
Screw stroke mm
  • 100
  • 145
Clamping unit

Clamping force ton 120
Clamp stroke-max. mm 360
Open daylight-max. mm 790
Mold thickness (min . - max.) mm 150 - 430
Platen dimension ( H x V ) mm 600 x 600
Tie-bar distance (H x V ) mm 410 x 410
Ejector stroke mm 100
General
Machine weight
 ton
  • 3.6
  • 3.7
Machine size (L x W x H) mm 4362 x 1201 x 1650


VFⅡ-150

Injection Unit
 Unit
  • VFⅡ-150 (V)
  • VFⅡ-150 (W)
Calculated injection capacity cm3
  • 116.6 - 147.6 - 182.2
  • 181.5 - 201.1 - 265.9
Actual shot weight (PS) g
  • 109.3 - 138.3 - 170.8
  • 170.1 - 188.5 - 249.2
Actual shot weight (PS) (oz)
  • 3.85 - 4.87 - 6.01
  • 5.99 - 6.64 - 8.78
Calculated Plasticizing capaclty (PS) kg/hr
  • 49.5 - 68.0 - 90.5
  • 67.4 - 77.5 - 113.7
Screw diameter mm
  • 32 - 36 - 40
  • 38 - 40 - 46
Screw L/D ratio
  • 22.5 - 20.0 - 18.0
  • 21.1 - 20.0 - 17.4
Screw stroke mm
  • 145
  • 160
Clamping unit

Clamping force ton 150
Clamp stroke-max. mm 400
Open daylight-max. mm 850
Mold thickness (min . - max.) mm 150 - 450
Platen dimension ( H x V ) mm 690 x 665
Tie-bar distance (H x V ) mm 460 x 460
Ejector stroke mm 100
General
Machine weight
 ton
  • 4.2
  • 4.3
Machine size (L x W x H) mm 4449 x 1372 x 1683


VFⅢ-180

Injection Unit
 Unit
  • VFⅡ-180 (W)
  • VFⅢ-180 (X)
Calculated injection capacity cm3
  • 181.5 - 201.1 - 265.9
  • 332.4 - 392.7 - 475.2
Actual shot weight (PS) g
  • 170.1 - 188.5 - 249.2
  • 311.5 - 368.1 - 445.4
Actual shot weight (PS) (oz)
  • 5.99 - 6.64 - 8.78
  • 10.97 - 12.96 - 15.68
Calculated Plasticizing capaclty (PS) kg/hr
  • 86.3 - 99.2 - 145.5
  • 97.2 - 120.5 - 150.4
Screw diameter mm
  • 38 - 40 - 46
  • 46 - 50 - 55
Screw L/D ratio
  • 21.1 - 20.0 - 17.4
  • 21.7 - 20.0 - 18.2
Screw stroke mm
  • 160​
  • 200
Clamping unit

Clamping force ton 180
Clamp stroke-max. mm 470
Open daylight-max. mm 1020
Mold thickness (min . - max.) mm 200 - 550
Platen dimension ( H x V ) mm 750 x 740
Tie-bar distance (H x V ) mm 510 x 510
Ejector stroke mm 140
General
Machine weight
 ton
  • 5.7
  • 5.9
Machine size (L x W x H) mm 5259 x 1410 x 1796


VFⅡ-220

Injection Unit
 Unit
  • VFⅡ-220 (W)
  • VFⅡ-220 (X)
Calculated injection capacity cm3
  • 181.5 - 201.1 - 265.9
  • 332.4 - 392.7 - 475.2
Actual shot weight (PS) g
  • 170.1 - 188.5 - 249.2
  • 311.5 - 368.1 - 445.4
Actual shot weight (PS) (oz)
  • 5.99 - 6.64 - 8.78
  • 10.97 - 12.96 - 15.68
Calculated Plasticizing capaclty (PS) kg/hr
  • 86.3 - 99.2 - 145.5
  • 97.2 - 120.5 - 150.4
Screw diameter mm
  • 38 - 40 - 46
  • 46 - 50 - 55
Screw L/D ratio
  • 21.1 - 20.0 - 17.4
  • 21.7 - 20.0 - 18.2
Screw stroke mm
  • 160
  • 200 
Clamping unit

Clamping force ton 220
Clamp stroke-max. mm 510
Open daylight-max. mm 1110
Mold thickness (min . - max.) mm 200 - 600
Platen dimension ( H x V ) mm 832 x 779
Tie-bar distance (H x V ) mm 560 x 560
Ejector stroke mm 150
General
Machine weight
 ton
  • 6.2
  • 6.4
Machine size (L x W x H) mm 5441 x 1499 x 1860


VFⅡ-260

Injection Unit
 Unit
  • VFⅢ-260 (X)
  • VFⅡ-260 (Y)
Calculated injection capacity cm3
  • 332.4 - 392.7 - 475.2
  • 570.2 - 678.6 - 871.6
Actual shot weight (PS) g
  • 311.5 - 368.1 - 445.4
  • 534.4 - 636.0 - 817.0
Actual shot weight (PS) (oz)
  • 10.97 - 12.96 - 15.68
  • 18.82 - 22.40 - 28.77
Calculated Plasticizing capaclty (PS) kg/hr
  • 121.5 - 150.7 - 188.0
  • 111.7 - 138.9 - 186.2
Screw diameter mm
  • 46 - 50 - 55
  • 55 - 60 - 68
Screw L/D ratio
  • 21.7 - 20.0 - 18.2
  • 21.8 - 20.0 - 17.6
Screw stroke mm
  • 200
  • 240 00a0;
Clamping unit

Clamping force ton 260
Clamp stroke-max. mm 580
Open daylight-max. mm 1230
Mold thickness (min . - max.) mm 250 - 650
Platen dimension ( H x V ) mm 923 x 890
Tie-bar distance (H x V ) mm 615 x 615
Ejector stroke mm 170
General
Machine weight
 ton
  • 9.1
  • 9.9
Machine size (L x W x H) mm 6421 x 1555 x 2013


VFⅡ-320

Injection Unit
 Unit
  • VFⅡ-320 (X)
  • VFⅡ-320 (Y)
  • VFⅡ-320 (L)
Calculated injection capacity cm3
  • 332.38 - 392.7 - 475.17
  • 570.2 - 678.58 - 871.6
  • 904.78 - 1162.1 - 1451.7
Actual shot weight (PS) g
  • 312 - 368 - 445
  • 534 - 636 - 817
  • 848 - 1089 - 1361
Actual shot weight (PS) (oz)
  • 10.97 - 12.96 - 15.682
  • 18.819 - 22.396 - 28.766
  • 29.861 - 38.355 - 47.91
Calculated Plasticizing capaclty (PS) kg/hr
  • 122 - 151 - 188
  • 114 - 142 - 190
  • 113 - 151 - 194
Screw diameter mm
  • 46 - 50 - 55
  • 55 - 00a0;60 - 00a0;68
  • 60 - 68 - 76
Screw L/D ratio
  • 21.739 - 20 - 18.182
  • 21.818 - 20 - 17.647
  • 22.667 - 20 - 17.895
Screw stroke mm
  • 200
  • 240 
  • 320
Clamping unit

Clamping force ton 320
Clamp stroke-max. mm 640
Open daylight-max. mm 1300
Mold thickness (min . - max.) mm 250 - 660
Platen dimension ( H x V ) mm 970 x 970
Tie-bar distance (H x V ) mm 660 x 660
Ejector stroke mm 200
General
Machine weight
 ton
  • 12.6
  • 13
  • 13.6
Machine size (L x W x H) mm
  • 7050 x 1862 x 2051
  • 7050 x 1862 x 2051
  • 7620 x 1862 x 2051


VFⅡ-400

Injection Unit
 Unit
  • VFⅢ-400 (Y)
  • VFⅡ-400(L)
  • VFⅡ-400 (M)
Calculated injection capacity cm3
  • 570.2 - 678.58 - 871.6
  • 904.78 - 1162.1 - 1451.7
  • 1234.8 - 1542.4 - 1884.2
Actual shot weight (PS) g
  • 534 - 636 - 817
  • 848 - 1089 - 1361
  • 1157 - 1446 - 1766
Actual shot weight (PS) (oz)
  • 18.819 - 22.396 - 28.766
  • 29.861 - 38.355 - 47.91
  • 40.752 - 50.905 - 62.185
Calculated Plasticizing capaclty (PS) kg/hr
  • 142 - 177 - 237
  • 141 - 189 - 242
  • 141 - 181 - 225
Screw diameter mm
  • 55 - 00a0;60 - 00a0;68
  • 60 - 68 - 76
  • 68 - 76 - 84
Screw L/D ratio
  • 21.818 - 20 - 17.647
  • 22.667 - 20 - 17.895
  • 22.353 - 20 - 18.095
Screw stroke mm
  • 240
  • 340 
  • 340
Clamping unit

Clamping force ton 400
Clamp stroke-max. mm 710
Open daylight-max. mm 1460
Mold thickness (min . - max.) mm 250 - 750
Platen dimension ( H x V ) mm 1070 x 1070
Tie-bar distance (H x V ) mm 710 x 710
Ejector stroke mm 200
General
Machine weight
 ton
  • 15.9
  • 16.5
  • 16.7
Machine size (L x W x H) mm
  • 7430 x 1865 x 2060
  • 7430 x 1865 x 2060
  • 8020 x 1865 x 2060


VFⅡ-480

Injection Unit
 Unit
  • VFⅡ-480 (L)
  • VFⅡ-480 (M)
  • VFⅡ-480 (N)
Calculated injection capacity cm3
  • 904.78 - 1162.1 - 1451.7
  • 1234.8 - 1542.4 - 1884.2
  • 1723.9 - 2105.9 - 2526.1
Actual shot weight (PS) g
  • 848 - 1089 - 1361
  • 1157 - 1446 - 1766
  • 1616 - 1974 - 2368
Actual shot weight (PS) (oz)
  • 29.861 - 38.355 - 47.91
  • 40.752 - 50.905 - 62.185
  • 56.893 - 69.501 - 83.37
Calculated Plasticizing capaclty (PS) kg/hr
  • 141 - 189 - 242
  • 141 - 181 - 231
  • 165 - 209 - 264
Screw diameter mm
  • 60 - 68 - 76
  • 68 - 76 - 84
  • 76 - 84 - 92
Screw L/D ratio
  • 22.667 - 20 - 17.895
  • 22.353 - 20 - 18.095
  • 22.105 - 20 - 18.261
Screw stroke mm
  • 320
  • 340 
  • 380
Clamping unit

Clamping force ton 480
Clamp stroke-max. mm 770
Open daylight-max. mm 1590
Mold thickness (min . - max.) mm 300 - 820
Platen dimension ( H x V ) mm 1200 x 1200
Tie-bar distance (H x V ) mm 810 x 810
Ejector stroke mm 220
General
Machine weight
 ton
  • 19.8
  • 20
  • 20.7
Machine size (L x W x H) mm
  • 8250 x 1940 x 2117
  • 8250 x 1940 x 2117
  • 8890 x 1940 x 2117


VFⅡ-580

Injection Unit
 Unit
  • VFⅡ-580 (M)
  • VFⅡ-580 (N)
  • VFⅡ-580 (P)
Calculated injection capacity cm3
  • 1234.8 - 1542.4 - 1884.2
  • 1723.9 - 2105.9 - 2526.1
  • 2323.5 - 2895.3 - 3529.9
Actual shot weight (PS) g
  • 1157 - 1446 - 1766
  • 1616 - 1974 - 2368
  • 2178 - 2714 - 3309
Actual shot weight (PS) (oz)
  • 40.752 - 50.905 - 62.185
  • 56.893 - 69.501 - 83.37
  • 76.684 - 95.555 - 116.5
Calculated Plasticizing capaclty (PS) kg/hr
  • 184 - 236 - 300
  • 214 - 272 - 343
  • 254 - 333 - 452
Screw diameter mm
  • 68 - 76 - 84
  • 76 - 84 - 92
  • 86 - 96 - 106
Screw L/D ratio
  • 22.353 - 20 - 18.095
  • 22.105 - 20 - 18.261
  • 22.326 - 20 - 18.113
Screw stroke mm
  • 340
  • 380
  • 400 
Clamping unit

Clamping force ton 580
Clamp stroke-max. mm 850
Open daylight-max. mm 1800
Mold thickness (min . - max.) mm 350 - 950
Platen dimension ( H x V ) mm 1280 x 1280
Tie-bar distance (H x V ) mm 860 x 860
Ejector stroke mm 250
General
Machine weight
 ton
  • 25.2
  • 25.9
  • 26.4
Machine size (L x W x H) mm
  • 9350 x 2020 x 2217
  • 9350 x 2020 x 2217
  • 9880 x 2020 x 2217
VFⅢ-60 VFⅡ-90 VFⅡ-120 VFⅡ-150 VFⅢ-180 VFⅡ-220 VFⅡ-260 VFⅡ-320 VFⅡ-400 VFⅡ-480 VFⅡ-580


VPSeries

Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement.

700-1300 Tons Precision built, high speed PIM machinery

Victor Taichung VP Series injection molding machine has been developed by fusing of merits of hydraulic injection machines (low maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise)

The innovative new servo motor with high-effect pump system, achieves energy-saving operation and quick response equivalent to all electric molding machines.



  Download


Features Product Specifications  


Features

  • Injection screw ACM2 German material
  • urface hardness: 900~1100 HV
  • Processed by Nitride (500~520˚C for 72hrs)
  • Nitrided thickness: 0.4~0.5 mm
  • Piston rod uses S45C steel which has excellent strength
  • Piston seal uses German make Merkel to reduce the leakage and extend piston life.
  • Energy saving - Almost equivalent to all electric molding machines.
  • Quick response - Injection response time (Standard mode).
  • Stability in low-velocity/low-pressure & wide range - Injection velocity: From ultra-low to high velocity range.
  • Linearity - Excellent linearity in both injection velocity and injection pressure.
  • Excellent injection holding pressure performance - Capability in sustaining high injection holding pressure longer (as compared with all electric types).
  • Reduction in the amount of hydraulic oil.
  • Silent! (Low noise) Almost equivalent to all electric molding machine.
Bi-metallic coating screw and barrel (Option)

SKD 61 base material. Excellent wear-resistant, corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials. Victor general purpose screw and barrels can process any kind of material like PE, PP, PA, ABS, AS. We also supply an optional screw & barrel for engineering materials like PC, PBT, PET, with an L/D ratio from 18, 20, 22.

This multi-notch non-return valve offers improved reaction times and high flow rates. Also improves cycle times and increases product precision.

The VP Series injection unit, utilizing the high wear and corrosion resistant ionnitrided screw and barrel, provides the injection volumes and plasticizing capacities necessary for the manufacture of precision products. With high injection stability and excellent mixing capabilities, this newly developed injection unit allows for the use of a wider range of materials. It all adds up to unit that will stay the course, giving consistently high quality and product output.

Heavy Duty,Rigid,Clamping Unit

All VP Series machines feature a unique, ultra-reliable, five-point toggle
clamping mechanism which is characterized by an almost ideal kinematic
velocity feature.
This high precision clamping unit is designed and analyzed using the latest in
computer software, i.e. CAD & CAE. The large cast iron platens are extremely
robust and with widely spaced tie-bars to accommodate the largest of molds. They have optimum rigidity that matches the current need in precision molding and which
minimizes mold deflection caused by clamping force and cavity pressure.
The large, square cast iron platens virtually eliminate deflection. The bushings are manufactured from graphite impregnated phosphor bronze. Designed to run totally oil-free,there's no chance of contaminating molds, and maintenance is limited to long periodic greasing.

Mold height adjustment, which is the bull gear system, is operated by a hydraulic motor and when co-ordinated with a monitoring program proceeds to prevent the possibility of overloading by force and cause machine damage.

Energy Saving system

The VP Series adopts logic valves in its hydraulic system circuits. The logic valves give high response performance in injection and mould travelling stages and offers 5% energy reduction due to lowpressure loss, and can guarantee a long service life. Less energy loss means lower heat buildup in addition to a substantial reduction in the requirement of cooling water. This is further help automatic regulation of the hydraulic oil temperature.

VP Energy Saving system:
The pressure transducer measures the real injection cylinder and feedback to P/Q control module for the close-loop pressure compensation. The servo motor rpm encoder measures and feedback the pump flow to P/Q control module for the speed compensation to get precision relativity control.

Overall Setting Screen


Pop-up Keyboards for Data and Text Entry


SPC/SQC Production Management - Quality Control



Product Specifications  

VP-700

Injection Unit
 Unit
  • VP-700 (NES)
  • VP-700 (PES)
  • VP-700 (RES)
Calculated injection capacity cm3
  • 945.72 - 1160.4 - 1432.6
  • 1343.6 - 1658.8 - 2099.4
  • 2010.6 - 2544.7 - 3141.6
Actual shot weight (PS) g
  • 886 - 1088 - 1343
  • 1259 - 1555 - 1968
  • 1885 - 2385 - 2945
Actual shot weight (PS) oz
  • 31.212 - 38.297 - 47.28
  • 44.343 - 54.745 - 69.287
  • 66.358 - 83.984 - 103.68
Calculated Plasticizing capaclty (PS) kg/hr
  • 163 - 200 - 265
  • 162 - 214 - 293
  • 192 - 263 - 361
Screw diameter mm
  • 65 - 72 - 80
  • 72 -  80 - 90
  • 80 - 90 - 100
Screw L/D ratio
  • 22.154 - 20 - 18
  • 22.222 - 20 - 17.778
  • 22.5 - 20 - 18
Screw stroke
 mm
  • 285
  • 330
  • 400
Clamping Unit
Clamping force
 ton 700
Clamp stroke-max. mm 930
Open daylight-max. mm 1930
Mold thickness (min . - max.) mm 400 - 1000
Platen dimension ( H x V ) mm 1460 x 1460
Tie-bar distance (H x V ) mm 960 x 960
Ejector stroke
 mm 260
General
Machine weight
 ton
  • 33.7
  • 34.2
  • 34.8 
Machine size (L x W x H) mm 9940 x 2230 x 2256


VP-850

Injection Unit
 Unit
  • VP-850 (PES)
  • VP-850 (RES)
  • VP-850 (SES)
Calculated injection capacity cm3
  • 1343.6 - 1658.8 - 2099.4
  • 2010.6 - 2544.7 - 3141.6
  • 2990 - 3691.4 - 4466.6
Actual shot weight (PS) g
  • 1259 - 1555 - 1968
  • 1885 - 2385 - 2945
  • 2803 - 3460 - 4187
Actual shot weight (PS) oz
  • 44.343 - 54.745 - 69.287
  • 66.358 - 83.984 - 103.68
  • 93.681 - 121.83 - 147.41
Calculated Plasticizing capaclty (PS) kg/hr
  • 249 - 330 - 451
  • 296 - 405 - 555
  • 258 - 353 - 451
Screw diameter mm
  • 72 - 80 - 90
  • 80 - 90 - 100
  • 90 - 100 - 110
Screw L/D ratio
  • 22.222 - 20 - 17.778
  • 22.5 - 20 - 18
  • 22.222 - 20 - 18.182
Screw stroke
 mm
  • 330
  • 400
  • 470
Clamping Unit
Clamping force
 ton 850
Clamp stroke-max. mm 1000
Open daylight-max. mm 2100
Mold thickness (min . - max.) mm
  • 400 - 1100
  • 450 - 1100
  • 450 - 1100
Platen dimension ( H x V ) mm 1600 x 1495
Tie-bar distance (H x V ) mm 1100 x 1000
Ejector stroke
 mm 260
General
Machine weight
 ton
  • 38.3
  • 39
  • 42.6
Machine size (L x W x H) mm 10480 x 2490 x 2375


VP-1000

Injection Unit
 Unit
  • VP-1000 (RES)
  • VP-1000 (SES)
  • VP-1000 (JES)
Calculated injection capacity cm3
  • 2010.6 - 2544.7 - 3141.6
  • 2990 - 3691.4 - 4466.6
  • 4319.7 - 5226.8 - 6220.4
Actual shot weight (PS) g
  • 1885 - 2385 - 2945
  • 2803 - 3460 - 4187
  • 4049 - 4899 - 5830
Actual shot weight (PS) oz
  • 66.358 - 83.984 - 103.68
  • 98.681 - 121.83 - 147.41
  • 142.56 - 172.5 - 205.29
Calculated Plasticizing capaclty (PS) kg/hr
  • 346 - 473 - 649
  • 303 - 415 - 530
  • 364 - 464 - 640
Screw diameter mm
  • 80 - 90 - 100
  • 90 - 100 - 110
  • 100 - 110 - 120
Screw L/D ratio
  • 22.5 - 20 - 18
  • 22.222 - 20 - 18.182
  • 22 - 20 - 18.333
Screw stroke
 mm
  • 400
  • 470
  • 550
Clamping Unit
Clamping force
 ton 1000
Clamp stroke-max. mm 1200
Open daylight-max. mm 2400
Mold thickness (min . - max.) mm 500 - 1200
Platen dimension ( H x V ) mm 1820 x 1720
Tie-bar distance (H x V ) mm 1250 x 1100
Ejector stroke
 mm 300
General
Machine weight
 ton
  • 53.1
  • 56.5
  • 58.5
Machine size (L x W x H) mm
  • 11425 x 2580 x 2558
  • 12050 x 2910 x 3030
  • 12565 x 2910 x 3065


VP-1300

Injection Unit
 Unit
  • VP-1300 (SES)
  • VP-1300 (JES)
  • VP-1300 (BES)
Calculated injection capacity cm3
  • 2990 - 3691.4 - 4466.6
  • 4319.7 - 5226.8 - 6220.4
  • 5702 - 6785.8 - 7963.9
Actual shot weight (PS) g
  • 2803 - 3460 - 4187
  • 4049 - 4899 - 5830
  • 5344 - 6360 - 7465
Actual shot weight (PS) oz
  • 98.681 - 121.83 - 147.41
  • 142.56 - 172.5 - 250.29
  • 188.19 - 223.96 - 250.29
Calculated Plasticizing 
capaclty (PS)  
 kg/hr
  • 303 - 415 - 530
  • 415 - 530 - 731
  • 499 - 688 - 881
Screw diameter mm
  • 90 - 100 - 110
  • 100 - 110 - 120
  • 110 - 120 - 130
Screw L/D ratio
  • 22.222 - 20 - 18.182
  • 22 - 20 - 18.333
  • 21.818 - 20 - 18.462
Screw stroke
 mm
  • 470
  • 550
  • 600
Clamping Unit
Clamping force
 ton 1300
Clamp stroke-max. mm 1300
Open daylight-max. mm 2600
Mold thickness (min . - max.) mm 550 - 1300
Platen dimension ( H x V ) mm 2010 x 1970
Tie-bar distance (H x V ) mm 1360 x 1280
Ejector stroke
 mm 330
General
Machine weight
 ton
  • 75.4
  • 77.17
  • 81
Machine size (L x W x H) mm
  • 12980 x 2855 x 3048
  • 13410 x 2940 x 3153
  • 13920 x 3275 x 3203
VP-700 VP-850 VP-1000 VP-1300


了解我们的产业解决方案，以优化生产力并满足您的需求

今天联系我们