english | Victor Taichung

GS Series

New Generation All-Electric injection molding machine

50-250 Tons Third Generation injection molding machine

Download

Features

Clamping Unit

Integrated guide armrest design
Integrated and synchronized processing, improve assembly accuracy, reduces guide bar warp and improves mold adjustment.
Precision and Clean design
Large linear distance configuration linear slide, higher accuracy and longer slider life.
Moving platen non-contact with Tie-bar. Prevent
products contaminated by lubrications oil.
Platen structure optimization
Square structure with concentrated crank force design, reduce platen distortion.

Injection Unit

Pivoting injection unit
130-250 Tons provide manual rotation of the injection unit. Easier for repair or replacement without remove the mold.
High rigidity injection structure
Injection casting Integrated design and all processed synchronized, high strength and precision.

Energy saving, Environmental

Save more than 60% of energy consumption
The All electric power system is completely driven by servo motor, at the same time, only water for feeding pipe inlet and mold cooling is required, save more than 60% of energy compared with the traditional hydraulic, at the same time, only water for feeding pipe inlet and mold cooling is required, cooling water usage saving to 1/5 or less of the hydraulic machine.

Controller

New generation ME300 electronic control system

The swivel mounted 15" LCD high resolution touch screen, graphicaluser interface.
Adopt dual CPU architecture (separation of man-machine and control) to improve system reliability.
Connected with EtherCAT, it has high-speed, real-time and stable communication.
The OS adopts Linux instant multiplex system, which is stable and efficient.
Internal molding parameters can be stored in 1000 groups, and USB can be used as external, this unit expands the storage space.

Expand

Product Specifications

GS-50

Injection Unit	Unit	GS-50 (C) GS-50 (D)
Screw diameter	mm	22 - 26 28 - 32
Calculated injection capacity	cm3	34 - 48 62 - 80
Actual shot weight-PS	g (oz)	32 (1.1) - 45 (1.6) 58 (2.0) - 76 (2.7)
Plastizing capacity	kg/hr	19 - 29 35 - 51
Screw L/D ratio	m/m	23.6 - 20.0 22.9 - 20.0
Screw stroke	mm	90 100
Clamping Unit
Clamping force	ton	50
Clamp stroke	mm	270
Mold thickness (Min-Max.)	mm	150 - 350
Open daylight-Max.	mm	620
Tie-bar distance	mm	360 x 310
Platen dimension	mm	505 x 502
Ejector stroke	mm	70
General
Machine weight	ton	2.9
Machine dimensions	mm	2672 x 1275 x 1990

GS-80

Injection Unit	Unit	GS-80 (D) GS-80 (F)
Screw diameter	mm	28 - 32 32 - 36
Calculated injection capacity	cm3	62 - 80 117 - 148
Actual shot weight-PS	g (oz)	58(2.0) - 76(2.7) 110(3.9) - 139(4.9)
Plastizing capacity	kg/hr	35 - 51 50 - 68
Screw L/D ratio	m/m	22.9 - 20.0 22.5 - 20.0
Screw stroke	mm	100 145
Clamping Unit
Clamping force	ton	80
Clamp stroke	mm	320
Mold thickness (Min-Max.)	mm	150 - 380
Open daylight-Max.	mm	700
Tie-bar distance	mm	410 X 360
Platen dimension	mm	585 x 530
Ejector stroke	mm	80
General
Machine weight	ton	4.1
Machine dimensions	mm	4350 X 1329 X 2018

GS-100

Injection Unit	Unit	GS-100 (D) GS-100 (F)
Screw diameter	mm	28 - 32 32 - 36
Calculated injection capacity	cm3	62 - 80 117 - 148
Actual shot weight-PS	g (oz)	58(2.0) - 76(2.7) 110(3.9) - 139(4.9)
Plastizing capacity	kg/hr	35 - 51 50 - 68
Screw L/D ratio	m/m	22.9 - 20.0 22.5 - 20.0
Screw stroke	mm	100 145
Clamping Unit
Clamping force	ton	100
Clamp stroke	mm	360
Mold thickness (Min-Max.)	mm	150 - 450
Open daylight-Max.	mm	810
Tie-bar distance	mm	460 X 410
Platen dimension	mm	640 X 595
Ejector stroke	mm	100
General
Machine weight	ton	4.7
Machine dimensions	mm	4520 X 1376 X 2083

GS-130

Injection Unit	Unit	GS-130 (F) GS-130 (G)
Screw diameter	mm	32 - 36 38 - 40 - 46
Calculated injection capacity	cm3	117 - 148 163 - 201 - 266
Actual shot weight-PS	g (oz)	110(3.9) - 139(4.9) 153(5.4) - 189(6.7) - 250(8.8)
Plastizing capacity	kg/hr	50 - 68 54 - 70 - 102
Screw L/D ratio	m/m	22.5 - 20.0 22.2 - 22.2 - 19.3
Screw stroke	mm	145 160
Clamping Unit
Clamping force	ton	130
Clamp stroke	mm	400
Mold thickness (Min-Max.)	mm	180 - 450
Open daylight-Max.	mm	850
Tie-bar distance	mm	510 X 460
Platen dimension	mm	720 X 685
Ejector stroke	mm	110
General
Machine weight	ton	6.5
Machine dimensions	mm	5282 X 1441 X 2185

GS-180

Injection Unit	Unit	GS-180 (G) GS-180 (H)
Screw diameter	mm	36 - 40 - 46 46 - 50 - 55
Calculated injection capacity	cm3	163 - 201 - 266 332 - 393 - 475
Actual shot weight-PS	g (oz)	153(5.4) - 189(6.7) - 250(8.8) 312(11.0) - 369(13.0) - 447(15.7)
Plastizing capacity	kg/hr	54 - 70 - 102 102 - 127 - 158
Screw L/D ratio	m/m	22.2 - 22.2 - 19.3 21.7 - 22.0 - 20.0
Screw stroke	mm	160 200
Clamping Unit
Clamping force	ton	180
Clamp stroke	mm	470
Mold thickness (Min-Max.)	mm	200 - 480
Open daylight-Max.	mm	950
Tie-bar distance	mm	560 X 510
Platen dimension	mm	785 X 745
Ejector stroke	mm	120
General
Machine weight	ton	8.9
Machine dimensions	mm	5940 X 1580 X 2250

GS-250

Injection Unit	Unit	GS-250 (H) GS-250 (J)
Screw diameter	mm	46 - 50 - 55 50 - 55 - 63
Calculated injection capacity	cm3	332 - 393 - 475 471 - 570 - 748
Actual shot weight-PS	g (oz)	312(11.0) - 369(13.0) - 447(15.7) 443(15.6) - 536(18.9) - 703(24.8)
Plastizing capacity	kg/hr	102 - 127 - 158 118 - 147 - 199
Screw L/D ratio	m/m	21.7 - 22.0 - 20.0 22.4 - 20.3 - 17.7
Screw stroke	mm	200 240
Clamping Unit
Clamping force	ton	250
Clamp stroke	mm	520
Mold thickness (Min-Max.)	mm	250 - 600
Open daylight-Max.	mm	1120
Tie-bar distance	mm	610 X 560
Platen dimension	mm	885 X 830
Ejector stroke	mm	150
General
Machine weight	ton	11.5
Machine dimensions	mm	6450 X 1655 X 2360

VFⅢ Series

Hybrid High-Performance Injection Moulding Machine

60-580 Tones VFⅢ Series Simple, Productive, Economical

With a powerful AX8 controller and a high efficacy gear pump driven by P.M. Synchronous servomotor to satisfy your energy saving requirement and achieves the outstanding process consistency and repeatability.

VFIII Series injection moulding machine has been developed by fusing of merits of hydraulic injection machines (low maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, highvelocity injection, quick response, high repeatability, and low operation noise)

The innovative new ser vo motor with high efficacy gear pump system, achieves energy-saving operation and quick response equivalent to those of all electric injection molding machines.

Download

Features

Energy saving-almost equivalent to all- electric model machine.
Quick response-Injection response time (Standard mode).
Stability in low-velocity/low-pressure & wide range-Injection velocity: From ultra-low to high velocity range.
Linearity-Excellent linearity in both injection velocity and injection pressure.
Excellent injection holding pressure performance-Capability in sustaining high injection holding pressure longer (as compared with full-electric machine).
Reduction in the amount of hydraulic oil and cooling water volume.
Silent! (Low noise gear pump operation) Almost equivalent to all electric injection molding machine.

High Precision Injection Unit

The VFIII Series optimum screw geometry plus the perfected drive and injection concepts provides excellent plasticising and injection capacity. Newly developed high wear and corrosion resistance ion-nitrided screw and barrel gives the customer a wide choice of materials for numerous applications.The gently prepared and properly homogenised melt is metered accurately,shot after shot,and is injected into the mould with high power and high speed.

The screw and barrel used on the machines has the following properties.

Injection screw ACM2 German material
Surface hardness: 900~1100 HV
Processed by Nitride(500~520 °C for 72hrs)
Nitrided thickness: 0.4~0.5 mm

Bi-metallic coating screw and barrel (Option) - SKD 61 base material. Excellent wear-resistant, corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials. Victor general purpose screw and barrels can process any kind of material like PE, PP, PA, ABS,AS. We also supply an optional screw & barrel for engineering materials like PC, PBT, PET, with an L/D ratio from 18, 20, 22.

The multi-notch locking style screw tip. the locking style tip is useful for stabilizing part weight and increasing product precision comparing the convectional screw tip. the gap between the screw and check ring is reduced to the least, thereby the back flow resin can be reduced to minimum.

Heavy Duty,Rigid,Clamping Unit

Every component in the clamping unit that is subjected to a mechanical stress was designed and checked using the F.E.M (Finite element method) method of structure analysis. All VFIII Series machines feature a unique, ultrareliable, five-point toggle clamping mechanism, which is characterised, by an almost ideal kinematic velocity feature.This system has fast speed, high force ratio, sensitive mould protection and good energy saving capabilities. The large square cast iron platens are extremely robust and the widely spaced tie bars allow for even the most complex of moulds.

The large, square cast iron platens virtually eliminate deflection. The bushings are manufactured from graphite impregnated phosphor bronze. Designed to run totally oil-free, there's no chance of contaminating molds, and maintenance is limited to long periodic greasing.

Mould height adjustment, which is the bull gear system, is operated by an electrical brake motor and when co-ordinated with a precision circuit breaker pro ceeds to prevent the possibility of overloading by force and cause machine damage.

New Generation AX8 Control

Intuitive 15 inch touch screen framed with keyboard

The swivel mounted 15" LCD high resolution touch screen, graphical user interface, can be optimally positioned for each operator, allowing an easy setting position and easy access to the mould area.
Lighted on/off manual movement buttons for each axis.

Simple Friendly Operation Interface

a. Convenient access to USB data, mold parameters and display screens.
b. Control supports OPC UA communication protocol for Industrial Interoperability towards Industry 4.0 and Industrial Internet of Things (lloT).
c. Barrel heat zones are accurate to 0.1 ·c to ensure stable material plasticizing.
d. Screw position is controlled with in 0.1 mm to precisely control shot size and cushion position.
e. Control reaction time in 0.5ms.

Overall Setting Screen

Pop-up Keyboards for Data and Text Entry

SPC/SQC Production Management - Quality Control

Product Specifications

VFⅢ-60

Injection Unit	Unit	VFⅢ-60 (Z) VFⅢ-60 (S) VFⅢ-60 (T)
Calculated injection capacity	cm3	14.1 - 19.8 38.0 - 49.1 61.6 - 80.4 - 101.8
Actual shot weight (PS)	g	13.2 - 18.6 35.6 - 46.0 57.7 - 75.4 - 95.4
Actual shot weight (PS)	(oz)	0.46 - 0.66 1.25 - 1.62 2.03 - 2.65 - 3.36
Calculated Plasticizing capaclty (PS)	kg/hr	8.0 - 13.3 20.1 - 28.8 28.5 - 41.6 - 57.2
Screw diameter	mm	16 - 19 22 - 25 28 - 32 - 36
Screw L/D ratio		22.0 - 22.0 22.7 - 20.0 22.9 - 20.0 - 17.8
Screw stroke	mm	70 100 100
Clamping unit
Clamping force	ton	60
Clamp stroke-max.	mm	270
Open daylight-max.	mm	590
Mold thickness (min . - max.)	mm	150 - 320
Platen dimension ( H x V )	mm	490 x 460
Tie-bar distance (H x V )	mm	310 x 310
Ejector stroke	mm	80
General
Machine weight	ton	2.4 2.5 2.5
Machine size (L x W x H)	mm	3706 x 1093 x1612

VFⅢ-90

Injection Unit	Unit	VFⅢ-90 (S) VFⅢ-90 (T) VFⅢ-90 (U)
Calculated injection capacity	cm3	38.0 - 49.1 61.6 - 80.4 - 101.8 104.6 - 132.3 - 163.4
Actual shot weight (PS)	g	35.6 - 46.0 57.7 - 75.4 - 95.4 98.0 - 124.0 - 153.1
Actual shot weight (PS)	(oz)	1.25 - 1.62 2.03 - 2.65 - 3.36 3.45 - 4.37 - 5.39
Calculated Plasticizing capaclty (PS)	kg/hr	20.1 - 28.8 28.5 - 41.6 - 57.2 39.6 - 54.4 - 2.4
Screw diameter	mm	22 - 25 28 - 32 - 36 32 - 36 - 40
Screw L/D ratio		22.7 - 20.0 22.9 - 20.0 - 17.8 22.5 - 20.0 - 18.0
Screw stroke	mm	100 100 130
Clamping unit
Clamping force	ton	90
Clamp stroke-max.	mm	320
Open daylight-max.	mm	670
Mold thickness (min . - max.)	mm	150 - 350
Platen dimension ( H x V )	mm	560 x 540
Tie-bar distance (H x V )	mm	360 x 360
Ejector stroke	mm	100
General
Machine weight	ton	3.3 3.3 3.4
Machine size (L x W x H)	mm	4234 x 1165 x 1593

VFⅢ-120

Injection Unit	Unit	VFⅢ-120 (T) VFⅢ-120 (V)
Calculated injection capacity	cm3	61.6 - 80.4 - 101.8 116.6 - 147.6 - 182.2
Actual shot weight (PS)	g	57.7 - 75.4 - 95.4 109.3 - 138.3 - 170.8
Actual shot weight (PS)	(oz)	2.03 - 2.65 - 3.36 3.85 - 4.87 - 6.01
Calculated Plasticizing capaclty (PS)	kg/hr	28.5 - 41.6 - 57.2 39.6 - 54.4 - 72.4
Screw diameter	mm	28 - 32 - 36 32 - 36 - 40
Screw L/D ratio		22.9 - 20.0 - 17.8 22.5 - 20.0 - 18.0
Screw stroke	mm	100 145
Clamping unit
Clamping force	ton	120
Clamp stroke-max.	mm	360
Open daylight-max.	mm	790
Mold thickness (min . - max.)	mm	150 - 430
Platen dimension ( H x V )	mm	600 x 600
Tie-bar distance (H x V )	mm	410 x 410
Ejector stroke	mm	100
General
Machine weight	ton	3.6 3.7
Machine size (L x W x H)	mm	4362 x 1201 x 1650

VFⅢ-150

Injection Unit	Unit	VFⅢ-150 (V) VFⅢ-150 (W)
Calculated injection capacity	cm3	116.6 - 147.6 - 182.2 181.5 - 201.1 - 265.9
Actual shot weight (PS)	g	109.3 - 138.3 - 170.8 170.1 - 188.5 - 249.2
Actual shot weight (PS)	(oz)	3.85 - 4.87 - 6.01 5.99 - 6.64 - 8.78
Calculated Plasticizing capaclty (PS)	kg/hr	49.5 - 68.0 - 90.5 67.4 - 77.5 - 113.7
Screw diameter	mm	32 - 36 - 40 38 - 40 - 46
Screw L/D ratio		22.5 - 20.0 - 18.0 21.1 - 20.0 - 17.4
Screw stroke	mm	145 160
Clamping unit
Clamping force	ton	150
Clamp stroke-max.	mm	400
Open daylight-max.	mm	850
Mold thickness (min . - max.)	mm	150 - 450
Platen dimension ( H x V )	mm	690 x 665
Tie-bar distance (H x V )	mm	460 x 460
Ejector stroke	mm	100
General
Machine weight	ton	4.2 4.3
Machine size (L x W x H)	mm	4449 x 1372 x 1683

VFⅢ-180

Injection Unit	Unit	VFⅢ-180 (W) VFⅢ-180 (X)
Calculated injection capacity	cm3	181.5 - 201.1 - 265.9 332.4 - 392.7 - 475.2
Actual shot weight (PS)	g	170.1 - 188.5 - 249.2 311.5 - 368.1 - 445.4
Actual shot weight (PS)	(oz)	5.99 - 6.64 - 8.78 10.97 - 12.96 - 15.68
Calculated Plasticizing capaclty (PS)	kg/hr	86.3 - 99.2 - 145.5 97.2 - 120.5 - 150.4
Screw diameter	mm	38 - 40 - 46 46 - 50 - 55
Screw L/D ratio		21.1 - 20.0 - 17.4 21.7 - 20.0 - 18.2
Screw stroke	mm	160 200
Clamping unit
Clamping force	ton	180
Clamp stroke-max.	mm	470
Open daylight-max.	mm	1020
Mold thickness (min . - max.)	mm	200 - 550
Platen dimension ( H x V )	mm	750 x 740
Tie-bar distance (H x V )	mm	510 x 510
Ejector stroke	mm	140
General
Machine weight	ton	5.7 5.9
Machine size (L x W x H)	mm	5259 x 1410 x 1796

VFⅢ-220

Injection Unit	Unit	VFⅢ-220 (W) VFⅢ-220 (X)
Calculated injection capacity	cm3	181.5 - 201.1 - 265.9 332.4 - 392.7 - 475.2
Actual shot weight (PS)	g	170.1 - 188.5 - 249.2 311.5 - 368.1 - 445.4
Actual shot weight (PS)	(oz)	5.99 - 6.64 - 8.78 10.97 - 12.96 - 15.68
Calculated Plasticizing capaclty (PS)	kg/hr	86.3 - 99.2 - 145.5 97.2 - 120.5 - 150.4
Screw diameter	mm	38 - 40 - 46 46 - 50 - 55
Screw L/D ratio		21.1 - 20.0 - 17.4 21.7 - 20.0 - 18.2
Screw stroke	mm	160 200
Clamping unit
Clamping force	ton	220
Clamp stroke-max.	mm	510
Open daylight-max.	mm	1110
Mold thickness (min . - max.)	mm	200 - 600
Platen dimension ( H x V )	mm	832 x 779
Tie-bar distance (H x V )	mm	560 x 560
Ejector stroke	mm	150
General
Machine weight	ton	6.2 6.4
Machine size (L x W x H)	mm	5441 x 1499 x 1860

VFⅢ-260

Injection Unit	Unit	VFⅢ-260 (X) VFⅢ-260 (Y)
Calculated injection capacity	cm3	332.4 - 392.7 - 475.2 570.2 - 678.6 - 871.6
Actual shot weight (PS)	g	311.5 - 368.1 - 445.4 534.4 - 636.0 - 817.0
Actual shot weight (PS)	(oz)	10.97 - 12.96 - 15.68 18.82 - 22.40 - 28.77
Calculated Plasticizing capaclty (PS)	kg/hr	121.5 - 150.7 - 188.0 111.7 - 138.9 - 186.2
Screw diameter	mm	46 - 50 - 55 55 - 60 - 68
Screw L/D ratio		21.7 - 20.0 - 18.2 21.8 - 20.0 - 17.6
Screw stroke	mm	200 240
Clamping unit
Clamping force	ton	260
Clamp stroke-max.	mm	580
Open daylight-max.	mm	1230
Mold thickness (min . - max.)	mm	250 - 650
Platen dimension ( H x V )	mm	923 x 890
Tie-bar distance (H x V )	mm	615 x 615
Ejector stroke	mm	170
General
Machine weight	ton	9.1 9.9
Machine size (L x W x H)	mm	6421 x 1555 x 2013

VFⅢ-320

Injection Unit	Unit	VFⅢ-320 (X) VFⅢ-320 (Y) VFⅢ-320 (L)
Calculated injection capacity	cm3	332.38 - 392.7 - 475.17 570.2 - 678.58 - 871.6 904.78 - 1162.1 - 1451.7
Actual shot weight (PS)	g	312 - 368 - 445 534 - 636 - 817 848 - 1089 - 1361
Actual shot weight (PS)	(oz)	10.97 - 12.96 - 15.682 18.819 - 22.396 - 28.766 29.861 - 38.355 - 47.91
Calculated Plasticizing capaclty (PS)	kg/hr	122 - 151 - 188 114 - 142 - 190 113 - 151 - 194
Screw diameter	mm	46 - 50 - 55 55 - 60 - 68 60 - 68 - 76
Screw L/D ratio		21.739 - 20 - 18.182 21.818 - 20 - 17.647 22.667 - 20 - 17.895
Screw stroke	mm	200 240 320
Clamping unit
Clamping force	ton	320
Clamp stroke-max.	mm	640
Open daylight-max.	mm	1300
Mold thickness (min . - max.)	mm	250 - 660
Platen dimension ( H x V )	mm	970 x 970
Tie-bar distance (H x V )	mm	660 x 660
Ejector stroke	mm	200
General
Machine weight	ton	12.6 13 13.6
Machine size (L x W x H)	mm	7050 x 1862 x 2051 7050 x 1862 x 2051 7620 x 1862 x 2051

VFⅢ-400

Injection Unit	Unit	VFⅢ-400 (Y) VFⅢ-400(L) VFⅢ-400 (M)
Calculated injection capacity	cm3	570.2 - 678.58 - 871.6 904.78 - 1162.1 - 1451.7 1234.8 - 1542.4 - 1884.2
Actual shot weight (PS)	g	534 - 636 - 817 848 - 1089 - 1361 1157 - 1446 - 1766
Actual shot weight (PS)	(oz)	18.819 - 22.396 - 28.766 29.861 - 38.355 - 47.91 40.752 - 50.905 - 62.185
Calculated Plasticizing capaclty (PS)	kg/hr	142 - 177 - 237 141 - 189 - 242 141 - 181 - 225
Screw diameter	mm	55 - 60 - 68 60 - 68 - 76 68 - 76 - 84
Screw L/D ratio		21.818 - 20 - 17.647 22.667 - 20 - 17.895 22.353 - 20 - 18.095
Screw stroke	mm	240 340 340
Clamping unit
Clamping force	ton	400
Clamp stroke-max.	mm	710
Open daylight-max.	mm	1460
Mold thickness (min . - max.)	mm	250 - 750
Platen dimension ( H x V )	mm	1070 x 1070
Tie-bar distance (H x V )	mm	710 x 710
Ejector stroke	mm	200
General
Machine weight	ton	15.9 16.5 16.7
Machine size (L x W x H)	mm	7430 x 1865 x 2060 7430 x 1865 x 2060 8020 x 1865 x 2060

VFⅢ-480

Injection Unit	Unit	VFⅢ-480 (L) VFⅢ-480 (M) VFⅢ-480 (N)
Calculated injection capacity	cm3	904.78 - 1162.1 - 1451.7 1234.8 - 1542.4 - 1884.2 1723.9 - 2105.9 - 2526.1
Actual shot weight (PS)	g	848 - 1089 - 1361 1157 - 1446 - 1766 1616 - 1974 - 2368
Actual shot weight (PS)	(oz)	29.861 - 38.355 - 47.91 40.752 - 50.905 - 62.185 56.893 - 69.501 - 83.37
Calculated Plasticizing capaclty (PS)	kg/hr	141 - 189 - 242 141 - 181 - 231 165 - 209 - 264
Screw diameter	mm	60 - 68 - 76 68 - 76 - 84 76 - 84 - 92
Screw L/D ratio		22.667 - 20 - 17.895 22.353 - 20 - 18.095 22.105 - 20 - 18.261
Screw stroke	mm	320 340 380
Clamping unit
Clamping force	ton	480
Clamp stroke-max.	mm	770
Open daylight-max.	mm	1590
Mold thickness (min . - max.)	mm	300 - 820
Platen dimension ( H x V )	mm	1200 x 1200
Tie-bar distance (H x V )	mm	810 x 810
Ejector stroke	mm	220
General
Machine weight	ton	19.8 20 20.7
Machine size (L x W x H)	mm	8250 x 1940 x 2117 8250 x 1940 x 2117 8890 x 1940 x 2117

VFⅢ-580

Injection Unit	Unit	VFⅢ-580 (M) VFⅢ-580 (N) VFⅢ-580 (P)
Calculated injection capacity	cm3	1234.8 - 1542.4 - 1884.2 1723.9 - 2105.9 - 2526.1 2323.5 - 2895.3 - 3529.9
Actual shot weight (PS)	g	1157 - 1446 - 1766 1616 - 1974 - 2368 2178 - 2714 - 3309
Actual shot weight (PS)	(oz)	40.752 - 50.905 - 62.185 56.893 - 69.501 - 83.37 76.684 - 95.555 - 116.5
Calculated Plasticizing capaclty (PS)	kg/hr	184 - 236 - 300 214 - 272 - 343 254 - 333 - 452
Screw diameter	mm	68 - 76 - 84 76 - 84 - 92 86 - 96 - 106
Screw L/D ratio		22.353 - 20 - 18.095 22.105 - 20 - 18.261 22.326 - 20 - 18.113
Screw stroke	mm	340 380 400
Clamping unit
Clamping force	ton	580
Clamp stroke-max.	mm	850
Open daylight-max.	mm	1800
Mold thickness (min . - max.)	mm	350 - 950
Platen dimension ( H x V )	mm	1280 x 1280
Tie-bar distance (H x V )	mm	860 x 860
Ejector stroke	mm	250
General
Machine weight	ton	25.2 25.9 26.4
Machine size (L x W x H)	mm	9350 x 2020 x 2217 9350 x 2020 x 2217 9880 x 2020 x 2217

VP Series

Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement.

700-1300 Tons Precision built, high speed PIM machinery

Victor Taichung VP Series injection molding machine has been developed by fusing of merits of hydraulic injection machines (low maintenance-free operation, long life, and low cost) and electric molding machines (energy-saving, high-velocity injection, quick response, high repeatability, and low operation noise)

The innovative new servo motor with high-effect pump system, achieves energy-saving operation and quick response equivalent to all electric molding machines.

Download

Features

Injection screw ACM2 German material
Surface hardness: 900~1100 HV
Processed by Nitride (500~520˚C for 72hrs)
Nitrided thickness: 0.4~0.5 mm
Piston rod uses S45C steel which has excellent strength
Piston seal uses German make Merkel to reduce the leakage and extend piston life.

Energy saving - Almost equivalent to all electric molding machines.
Quick response - Injection response time (Standard mode).
Stability in low-velocity/low-pressure & wide range - Injection velocity: From ultra-low to high velocity range.
Linearity - Excellent linearity in both injection velocity and injection pressure.
Excellent injection holding pressure performance - Capability in sustaining high injection holding pressure longer (as compared with all electric types).
Reduction in the amount of hydraulic oil.
Silent! (Low noise) Almost equivalent to all electric molding machine.

Bi-metallic coating screw and barrel (Option)

SKD 61 base material. Excellent wear-resistant, corrosion resistant screw & barrel for the processing of materials with fiber additives and also fire retardant materials. Victor general purpose screw and barrels can process any kind of material like PE, PP, PA, ABS, AS. We also supply an optional screw & barrel for engineering materials like PC, PBT, PET, with an L/D ratio from 18, 20, 22.

This multi-notch non-return valve offers improved reaction times and high flow rates. Also improves cycle times and increases product precision.

The VP Series injection unit, utilizing the high wear and corrosion resistant ionnitrided screw and barrel, provides the injection volumes and plasticizing capacities necessary for the manufacture of precision products. With high injection stability and excellent mixing capabilities, this newly developed injection unit allows for the use of a wider range of materials. It all adds up to unit that will stay the course, giving consistently high quality and product output.